Felpro

Felpro - Rear Main Seal, Silicone, 2 Piece, Small Block Chev

Engines: SBC

$30.00

In stock

Check fitment and quantity before ordering.

Pickup in East Rockingham

Usually ready in 1 hour

Need help? Contact CJs to confirm fitment.

Found a better price? Submit a price match request

Your name

Email address

Advertised competitor product URL

Advertised competitor price

Additional details

I confirm this is an advertised price from an authorised retailer.

Price must be currently advertised and publicly available. CJs may request extra details before approving a match.

Overview

Engine Displacement	194, 229 (3.8L), 230, 250, 262, 262 (4.3L), 267, 283, 292, 302, 305, 307, 327, 350, 400, 400 Race
Engine Family	Chevrolet L6, Chevrolet V6, Chevrolet V8 Small Block
Materials/Construction	Silicone, 2-piece

SBC

Fitment

Confirm fitment before ordering. Contact us if you need help matching parts to your build.

Manufacturer torque spec: 1. Thoroughly clean all foreign material from block, bearing camp and crankshaft.

2. Debur the sharp edge where the seal housing bore meets the mating surfaces of the cap and block. This will prevent “shaving” the back side of the seal during installation

3. Install the seal halves with the sealing lip toward the front of the engine

4. Offset the seal parting lines 3/8” from the cap and block surfaces.

5. Sparingly, apply a thin film of silicone sealer to the seal ends that protrude from the cap and block, and along the chamber at the sides of the cap.

6. Lubricate the seal lip and crankshaft with oil or grease. Note: use grease if there will be a long period of time before startup.

7. Install the cap and set the crank end play per manufacturers specs.

8. Remove any excess sealer that may have squeezed out around the seal and cap

Test run engine. Check all mating areas thoroughly to determine that all seals hold during operation